We will take care of this task for you! The floor prices are set by the Partner manager/support team for the placements created on InMobi dashboard. If you have questions regarding the same, please contact your dedicated partner manager or write to firstname.lastname@example.org.
The following steps will help you test ads at your end without any assistance. We would recommend that you pause for a moment and go through the same carefully.
|If you are integrating an ad unit for the first time:||Set Test Mode to Global ON|
|If you want to selectively turn on test traffic for a set of devices:
If you already have a prior version of the SDK integrated for this particular ad unit, you should restrict your testing to only a few devices.
|Set Test Mode to Selective ON. Under the Device section:
NOTE: If you already have a device configured, select the device for the test mode to be enabled.
Once you are done testing, please ensure that the TEST MODE is turned OFF so that you can start sending the ad requests to the network.
Please reach out to your InMobi partner manager or support at email@example.com. Kindly provide the following information if you choose to write to our support team:
InMobi’s SDK supports banners, graphical interstitials, video interstitials (skippable and non-skippable), rewarded ads and native ads as per the IAB guidelines.
Still confused? No problem. Refer to our blog which has helped our publishers explore the magic with InMobi.